Petro-Canada Duron oils exceed API PC-12 spec ahead of 2027 engines
New heavy-duty diesel engine oil formulations deliver 50% better wear protection and 500% better scuffing performance than upcoming API standard, company says.

Petro-Canada Lubricants will ship its next-generation Duron heavy-duty diesel engine oils on January 1, 2027, formulated to exceed the American Petroleum Institute's upcoming PC-12 specification. The oils are timed to arrive ahead of 2027 model-year engines, which face stricter NOx emissions limits.
How much better is the new Duron oil than the PC-12 requirement?
Petro-Canada says the new formulations delivered 50% better wear protection than the PC-12 requirement in the Caterpillar C13 test. In the DD13 scuffing test, the oils showed more than 500% better performance than the PC-12 requirement. The Cummins ISM test returned twice the overall merit rating required by the spec.
Oxidation control came in more than 50% better than the PC-12 requirement after 300 hours in the OM471 Engine Cleanliness Test. That metric matters because oxidation breakdown shortens drain intervals and accelerates sludge formation.
What PC-12 means for drain intervals and shop costs
PC-12 (Proposed Category 12) is the 12th oil category developed by API. Development started in January 2022 at the request of truck makers and Cummins, ahead of the 2027 model-year engine launches. It replaces CK-4 and FA-4, which were introduced in 2017.
The new category addresses tighter tolerances and higher combustion pressures in 2027 engines. Those engines must meet EPA NOx limits roughly 90% lower than 2010 standards, which puts additional stress on oil chemistry.
Petro-Canada says the improved oxidation control could allow fleets to extend oil drain intervals, reduce downtime, and lower operating costs. The company did not specify drain-interval targets in miles or hours.
"We know fleets are under constant pressure to control costs without compromising protection," said Melissa Mastrocola, business segment manager for transportation at Petro-Canada Lubricants. "Our customers need increased wear protection and improved oxidation control, and we're proud to have products that can ultimately lower their total cost of ownership by letting users drive every advantage that Duron oils offer."
When to switch and what to follow
The new Duron line will be available January 1, 2027. Petro-Canada advises that heavy-duty engine oil selection should always follow the original equipment manufacturer's recommendation, with support from a lubricant technical expert.
Fleets running pre-2027 engines can continue using CK-4 or FA-4 oils. PC-12 oils are backward-compatible, but OEMs will specify which category is required to maintain warranty coverage on 2027 and later engines.
The company says the oils are designed for on-road and off-road operations facing equipment reliability pressures, rising maintenance costs, fuel efficiency targets, and emissions system performance demands. No pricing was disclosed.




