EPA Proposes 1234yf Refrigerant for Heavy-Duty Trucks Starting MY 2027
SNAP rule would shift on-highway trucks to low-GWP refrigerant at OEM level. Retrofit procedure pending approval for legacy fleets.

EPA proposed a SNAP rule requiring on-highway heavy-duty trucks to use R-1234yf refrigerant starting with model year 2027. The rule would apply at the OEM level, meaning new trucks would arrive from the factory filled with 1234yf instead of R-134a.
When does the EPA 1234yf refrigerant rule take effect for heavy-duty trucks?
The proposed rule targets model year 2027 as the first year on-highway trucks would be factory-filled with R-1234yf. EPA has not published a final effective date. The rule is part of the agency's Significant New Alternatives Policy (SNAP) program, which evaluates substitutes for ozone-depleting substances and high-global-warming-potential chemicals.
Why EPA is forcing the refrigerant switch
The driver is global warming potential. R-134a, the current standard refrigerant in heavy-duty truck air conditioning systems, has a GWP of approximately 1,200. R-1234yf has a GWP around four. That 300-to-1 reduction puts 1234yf in the same low-GWP category EPA already requires for passenger cars.
Heavy-duty is following the passenger-car timeline by roughly a decade. Light-duty vehicles began transitioning to 1234yf in the mid-2010s under earlier SNAP rules. The proposed MY 2027 start date for trucks gives OEMs time to redesign A/C systems and supply chains to handle the new refrigerant.
Retrofit procedure for legacy trucks
Chemours has submitted a retrofit procedure to EPA for SNAP approval. The procedure would let fleets convert existing R-134a systems to 1234yf without replacing the entire A/C unit.
Brittany Georges, a Chemours representative, outlined the steps in a November 16 FleetOwner podcast. The process includes recovering the old refrigerant, flushing the system, replacing the receiver-drier, and recharging with 1234yf. Most of those tasks are already standard A/C service, so the added labor time is small.
EPA has not yet approved the retrofit procedure. Until approval, fleets cannot legally convert legacy trucks to 1234yf under SNAP rules. Chemours did not provide a timeline for when EPA might finalize the retrofit guidance.
Whether to retrofit is a fleet-by-fleet call
Consolidating on one refrigerant simplifies shop procedures and tool inventory. A fleet running both 134a and 1234yf trucks needs separate recovery machines, hoses, and refrigerant stocks. Technicians must verify which refrigerant a truck uses before servicing to avoid cross-contamination, which damages A/C components and violates EPA refrigerant-handling rules.
But a truck headed for retirement may not justify the retrofit cost. Fleets will need to weigh the remaining service life of each truck against the cost of conversion and the operational benefit of single-refrigerant shops. The Chemours procedure does not require replacing compressors or condensers in most cases, which keeps retrofit cost lower than a full A/C replacement, but fleets still pay for refrigerant, labor, and downtime.
What California and other states are discussing next
California and other states are discussing additional refrigerant regulations beyond the federal SNAP rule, according to the FleetOwner podcast. The podcast did not specify which regulations or which states. California has historically moved faster than EPA on emissions and climate rules, often setting timelines that later become de facto national standards when OEMs build to the California spec rather than maintaining separate product lines.
Fleets operating in California or states that adopt California rules may face earlier compliance deadlines or stricter retrofit mandates than the federal MY 2027 OEM requirement. Carriers should monitor CARB rulemaking and state legislative calendars for refrigerant proposals that could affect legacy-truck A/C service.
What carriers need to confirm with their A/C service shops
Carriers should ask their A/C service providers whether they plan to stock 1234yf and invest in separate recovery equipment before the MY 2027 trucks arrive. Shops that delay the investment will not be able to service the new refrigerant, forcing fleets to find alternative service locations or handle A/C work in-house.
Fleets that self-service A/C systems will need to budget for 1234yf-compatible recovery machines, which cannot be used interchangeably with 134a equipment. Cross-contamination between refrigerants ruins both the refrigerant and the A/C system. EPA refrigerant-handling certification (Section 609 for mobile A/C) already requires technicians to use refrigerant identifiers before servicing a system. That step becomes more important when a fleet runs mixed refrigerants.
Carriers should also confirm whether their truck OEM plans to offer 1234yf as standard or optional for MY 2027. Some manufacturers may phase in the new refrigerant across model years rather than switching the entire lineup at once. Knowing the OEM timeline helps fleets plan shop-tool purchases and technician training.
The compliance calendar for fleets buying new trucks in 2027
Fleets ordering MY 2027 trucks should expect factory-fill 1234yf if the SNAP rule is finalized as proposed. That means the first 1234yf trucks could arrive at dealerships in late 2026 for early MY 2027 builds, depending on OEM production schedules.
Fleets with standing truck orders should confirm refrigerant type with their dealer before delivery. If a fleet's A/C service shop is not yet equipped for 1234yf, the fleet will need to arrange alternative service or delay taking delivery until shop equipment is in place. Running a truck with a non-functional A/C system is not a regulatory violation, but it is a driver-retention problem in summer months and a resale-value hit.
EPA has not published a docket number or comment period for the proposed SNAP rule. Fleets that want to submit comments on the MY 2027 timeline or the retrofit procedure should monitor EPA's SNAP program page for the formal proposal notice.


