Freight Carrier · Bessemer, AL

INDUSTRIAL SCRAP PROCESSORS INCORPORATED

2101 10TH AVENUE NORTH · Bessemer, AL 35020

Not Authorized
(205) 428-7901 Tap to call
  • MC #827928
  • USDOT #1597307 USDOT Active
  • 8
    Power Units
  • 6
    Drivers
  • Carrier
    Entity Type

About this carrier

INDUSTRIAL SCRAP PROCESSORS INCORPORATED is a Bessemer, AL freight carrier that is not authorized in the state of Alabama. This company has 8 truck(s) in their fleet and 6 truck drivers. Their motor carrier number is MC-827928 and their USDOT number is 1597307.

Sourced from FMCSA SAFER · last filed 07/18/2023 · last updated Oct 19, 2026.

Carrier Details

  • Operating Status NOT AUTHORIZED
  • MCS-150 Filed 07/18/2023
  • MCS-150 Mileage 1,230,000 (2022)

Authority & Operations

Operation Classification
  • Authorized for Hire
  • Private (Property)
Carrier Operation
  • Intrastate (Non-Hazmat)

Operating Territory

Home base   Based in Bessemer, Alabama. No roadside inspections on record in the past 24 months to map operating states.

Safety Record

14 Severe Violations Updated May 20, 2026

Crashes (24 mo)

  • 0
    Fatal
  • 0
    Injury
  • 0
    Tow
  • 0
    Total

Behavior Categories (BASICs)

CategoryMeasureViolations Unsafe Driving 2.62 1 Crash Indicator Not Public — Hours of Service 0 0 Vehicle Maintenance 15.11 21 Drugs / Alcohol 0 0 Hazmat Not Public — Driver Fitness 0 0

Inspection Summary

  • 32
    Total
  • 10
    Clean
  • 22
    With violations

24-month window ending Apr 24, 2026

Violations Cited 44 unique codes

Critical 14

  • 393.75(a)(3)Tire-flat and/or audible air leak4× OOS×4 SW 8
  • 393.75(a)Flat tire or fabric exposed1× OOS×1 SW 8
  • 393.75A3-TAOLTires - All others, leaking or inflation less than 50% of the maximum inflation pressure on tire not equipped with ATIS1× OOS×1 SW 8
  • 393.75(a)(4)Tire-cut exposing ply and/or belt material1× OOS×1 SW 8
  • 393.75(a)(1)Tire-ply or belt material exposed1× SW 8
  • 393.75(c)Tire-other tread depth less than 2/32 of inch measured in a major tread groove1× SW 8
  • 393.134(b)(3)Rear of container not properly secured2× OOS×2 SW 7
  • 393.134B-CRHLCRoll-on/Roll-off/Hook Lift Containers - Improper securement of a roll-on/roll-off and hook lift container1× OOS×1 SW 7
  • 393.100(b)Leaking/spilling/blowing/falling cargo1× OOS×1 SW 7
  • 393.9B-LRLIWRLighting - Tail lamp - Both lamps on rearmost vehicle inoperative when required to be on1× OOS×1 SW 6
  • 393.134(b)(1)No blocking against forward movement1× OOS×1 SW 3
  • 393.9Inoperable Required Lamp8× OOS×2 SW 2
  • 392.9(a)Failing to secure load1× OOS×1 SW 1
  • 393.130No/improper heavy vehicle/machine securement1× OOS×1 SW 1

Unsafe Driving 1

  • 392.2-SLLS3State/Local Laws - Speeding 11-14 miles per hour over the speed limit1× SW 7

Vehicle Maintenance 29

  • 393.9A-LPLLighting - Parking lamp(s) inoperative2× SW 6
  • 393.9A-LBLLighting - Backup lamp inoperative2× SW 6
  • 393.209(e)Power steering violations2× SW 6
  • 393.209E-SPSLASteering - Power steering leaking anywhere.2× SW 6
  • 393.9A-LSLILighting - Stop lamps - Any inoperative.1× SW 6
  • 393.9A-LTSIRLighting - Turn signal -Any inoperative on a unit that is not the rearmost unit1× SW 6
  • 396.17C-PIOperating a CMV without documentation of a periodic inspection4× SW 4
  • 393.55C1-BAir Brake - Truck-tractor manufactured on or after March 1, 1997, not equipped with an ABS system. System does not function or indicates a fault.3× SW 4
  • 396.9D2-FTFFailing to correct the violation(s)/defect(s) noted on the roadside inspection report2× SW 4
  • 396.17(c)Operating a CMV without proof of a periodic inspection2× SW 4
  • 393.55E-BAir Brake - ABS malfunction lamp defective on trailers manufactured on or after March 1, 19982× SW 4
  • 396.5(b)Oil and/or grease leak3× SW 3
  • 393.11No or defective lighting devices or reflective material as required2× SW 3
  • 393.11A1-CSLRRConspicuity Systems - Truck tractor, lower rear retro reflective sheeting missing on vehicle manufactured on or after July 1, 19972× SW 3
  • 393.30Improper battery installation1× SW 3
  • 393.104(f)(3)Loose or unfastened tiedown1× SW 3
  • 393.95(a)No/discharged/unsecured fire extinguisher3× SW 2
  • 393.9A-LILLighting - Identification lamp(s) inoperative3× SW 2
  • 393.95A4-EEUSEmergency Equipment - Fire Extinguishers - unsecured3× SW 2
  • 393.9A-LCLLighting - Clearance lamp(s) inoperative2× SW 2
  • 393.9A-LLPLLighting - License plate lamp inoperative2× SW 2
  • 393.9A-LSMLLighting - Side marker lamp(s) inoperative2× SW 2
  • 393.86(b)(1)Rear Impact Guard Required - motor vehicle manufactured after 12/31/1952 (see exceptions)1× SW 2
  • 393.11A1-LILLighting - Identification lamp(s) missing1× SW 2
  • 393.60(d)Windshield / Windows - Tinting permits less than 70% of light transmittance5× SW 1
  • 393.78A-WSWashers - Inoperative washing system.4× SW 1
  • 393.78Wipers - Inoperative / missing / damaged wipers4× SW 1
  • 393.104(b)Damaged securement system/tiedowns1× SW 1
  • 393.60(c)Windshield - Damaged or Discolored1× SW 1

Locations

Physical Address
INDUSTRIAL SCRAP PROCESSORS INCORPORATED
2101 10TH AVENUE NORTH
BESSEMER, AL 35020
Mailing Address
INDUSTRIAL SCRAP PROCESSORS INCORPORATED
PO BOX 560
DOLOMITE, AL 35061

Location on Map